Connecting The Sb-27 To A Camera With A Sync Cord - Nikon Autofocus Speedlight SB-27 Instruction Manual

Connecting the SB-27 to a camera with a sync cord

To connect the SB-27 to a camera with a sync cord, connect
the sync cord to the SB-27's sync terminal.
Usable sync cords SC-11, SC-15
To connect the SB-27 to a camera without a sync terminal, use Sync
Terminal Adapter AS-15 (optional).
When connected by a sync cord, the SB-27's normal
functions are inoperative, except for flash firing. The SB-27
provides neither automatic sync speed setting nor ready-
light viewfinder indication.
—Use optional TTL Remote Cord SC-17 or SC-24 when using the
SB-27 off the camera in order to maintain all functions. (See
page 77.)
74
(optional) See page 77.