Table of Contents
Advertisement
ACCESSORIES
_ _ _ _ _ _ _ _
OC Unit SO·7
The SD-7 uses six C-type batteries, and serves as a
power source for any of the Nikon Speedlights S8-140,
S8-14 and S8-11. It has a neckstrap for convenient
use.
TTL Remote Cords SC·12 and
SC·23
The SC-12 is for Nikon F3-series cameras
;
the SC-23 is
for the Nikon
FA, FE2, F-501/N2020, F-301/N2000, FG,
and Nikonos-V (via the Sync Cord, Type V). Connecting
the
S8
-140 and an appropriate camera with SC-12 or
SC-23 provides
TTL
control of flash exposure (for
visible-
light photography only). Also provided are automatic
switchover of shutter
speed
to the proper
synchronization
speed
and ready-light indication in the camera
's view-
finder.
Sensor Remote Cord SC·13
The SC-13 allows mounting of the S8-140's Sensor Unit
SU-3
directly on a camera's ISO-type accessory
shoe
for
automatic (but not TTL), off-camera operation
(for visible-
light photography only). With a
dedicated
Nikon camera,
such
as the
FA, FE2,
FE, FM2, F-501/N2020,
F- 3011
N2000,
FG, FG-20,
or EM
,
or"With an F3-series camera
via the AS-4 or AS-7 coupler, ready-light indication is pro-
vided
in the camera 's
viewfinder.
For all cameras except
the
FM2,
automatic switchover of
shutter
speed to
a
proper synchronization
speed
is also provided
.
32
Sync Cord SC·15
A coiled cord over one meter in length, the SC-15 enables
the S8-140 to be detached from
its
bracket and used off-
camera.
Sensor Unit SU·2
Replace the
SU-3
with
the
SU-2,
set the
SU-2's
mode
selector
to S
(for
slave),
the S8-140
emits a
modulated
burst
of
light
which can trigger a
second flash unit. The
remote flash unit is
connected
to
the
receiver portion of
the
optional
Modulite Remote Control Unit ML-1
(which
is
set
to channel
2),
while the S8-140
acts as
the transmitter.
Slave flash operation
can
be performed only
in visible
light.
Advertisement
Table of Contents
