Multiple flash operation
Manual multiple flash operation procedures
(Applicable to all cameras)
Speedlights which can serve as a slave flash unit
SB-80DX, SB-30, SB-29s/29, SB-28/28DX, SB-27, SB-26, SB-25,
SB-24, SB-22s, SB-22, SB-20, SB-17, SB-16, SB-15, SB-14, SB-11,
SB-140
Usable remote cords (optional) (See page 77.)
Sync Cord SC-11/SC-15
TTL Remote Cord SC-17
TTL Multi-Flash Sync Cord SC-18/SC-19
1
Use the sync terminal for connecting the SB-27 with
other Speedlight slave units via optional sync cords.
2
Set Manual (M) Flash mode on each Speedlight.
3
Setting up a master flash unit and slave unit(s)
Set the zoom-head position and the flash-to-subject shooting distance
on the master flash unit. Set the slave unit(s) in the same way.
4
Follow the same procedures as in Manual (M) Flash mode.
For guide numbers for each light output in Manual (M) mode,
see page 46.
68
—(Applicable to all camera groups)