Flash Operation In Auto Mode (Cameras In Group Vii: F3-Series, F55-Series/N55-Series, New Fm2, Fm10, Fe10) - Nikon Autofocus Speedlight SB-27 Instruction Manual

Flash operation in AUTO mode
With cameras in Group VII, be sure to set the camera setting
switch (inside the SB-27's battery chamber) to ˚, and
choose "AUTO" (in the flash mode selector); the flash mode
is automatically set to Non-TTL Auto Flash.
—In non-TTL Auto Flash mode, flash mode indicator ˙ appears in the
SB-27's LCD panel.
Procedures
Lens in use
1
Nikkor lenses with built-in CPU*
Nikkor lenses without built-in CPU
*G-type Nikkor lenses cannot be used.
NOTE
• Set the lens to the same aperture value as in the SB-27 to obtain
a correct exposure.
• A usable aperture value appears in the SB-27's LCD panel
whenever you press the "F" button.
38
(Cameras in Group VII:
Available flash
2
operation
Non-TTL Auto
Flash
˙