Close-Up Flash Operation Using An Ttl Remote Cord - Nikon Autofocus Speedlight SB-27 Instruction Manual

Close-up flash operation in AUTO mode (Cameras in
Close-up flash operation using a TTL Remote Cord
When you want to ensure sufficient illumination, or illuminate
your subject from the side or the back, detach the SB-27
from the camera and use an optional TTL Remote Cord.
1
Connect the SB-27 to the camera using a TTL
Remote Cord.
—Use optional TTL Remote Cord SC-24 when connecting the SB-27 to
an F4-Series camera fitted with a High-Magnification Finder (DW-20
or DW-21).
—Use optional TTL Remote Cord SC-17 when connecting the SB-27 to
other cameras with an ISO type hot shoe.
2
After first setting the camera's exposure mode to A or M,
set the SB-27's flash mode selector to "AUTO."
3
Position the SB-27 properly and adjust the angle.
—Be sure to position the SB-27 and adjust the angle so as to
sufficiently illuminate the subject.
58