Philips PT920CC User Manual page 8

English
8
- The shaver, the Jet Clean System, the charging stand
and the other accessories are not dishwasher-proof.
- Water may leak from the socket at the bottom
of the shaver when you rinse it. This is normal
and not dangerous because all electronics are
enclosed in a sealed power unit inside the shaver.
- Do not use the shaver, Jet Clean System, adapter,
charging stand or any other part if it is damaged,
as this may cause injury. Always replace a damaged
adapter, charging stand or part with one of the
original type.
- Use, charge (specific types only) and store the
shaver and the Jet Clean System at a temperature
between 10°C and 35°C.
- Always place and use the shaver and the Jet Clean
System on a surface that is fluid-resistant.
- Only use the adapter, charging stand
and accessories supplied.
- Always put the protection cap on the shaver
to protect the shaving heads when you are travelling.
- Only use the Jet Clean System with the original
HQ200 cleaning fluid.
- Always place the Jet Clean System on a stable,
level and horizontal surface to prevent leakage.
- When the Jet Clean System is ready for use, do
not move it to prevent leakage of cleaning fluid.
- The Jet Clean System thoroughly cleans but does
not disinfect your shaver, therefore do not share
the shaver with others.
- Empty the cleaning chamber of the Jet Clean
System and clean the cleaning chamber thoroughly
by rinsing it with hot tap water every 15 days.
- If the shaver and the Jet Clean System
are subjected to a major change in temperature,
pressure or humidity, let them acclimatise for 30
minutes before you use them.