Philips PT920CC User Manual page 26

English
26
Problem
The shaver does
not shave as well
as it used to.
The shaver does
not work when I
press the on/off
button.
Possible cause
The Jet Clean System
(specific types only) has
not cleaned the shaver
properly because the
cleaning fluid in the
cleaning chamber is
soiled or the cleaning
fluid level is too low.
The shaving heads are
damaged or worn.
Long hairs obstruct the
shaving heads.
You have not inserted
the shaving heads
properly.
The rechargeable
battery is empty.
Solution
Clean the shaver
thoroughly before
you continue shaving.
If necessary, clean
and refill the cleaning
chamber (see
chapter 'Cleaning and
maintenance').
Replace the shaving
heads (see chapter
'Replacement').
Clean the shaving
heads one by one
(see section 'Cleaning
the shaving unit with
the cleaning brush'
in chapter 'Cleaning and
maintenance').
Make sure that the
projections of the
shaving heads fit exactly
into the recesses (see
section 'Cleaning the
shaving unit with the
cleaning brush').
Recharge the battery
(see chapter 'Charging')
or connect the
shaver to the mains.