Philips PT920CC User Manual page 17

- Clean the inside and outside of the shaving guard
with the brush.
6 Put the shaving heads back into the shaving
unit.
Make sure that the projections of the shaving
heads fit exactly into the recesses.
7 Put the retaining frame back into the shaving
unit and turn the lock clockwise.
8 Insert the lug of the shaving unit into the slot
in the top of the shaver (1). Then close the
shaving unit (2).
Note: If the shaving unit does not close smoothly, check
if you have inserted the shaving heads properly and if
the retaining frame is locked.
Cleaning the shaving unit in the Jet Clean
System (specific types only)
The Jet Clean System cleans the shaving unit.
Preparing the Jet Clean system for use
Note: Fill the cleaning chamber before first use and
when the 'fluid low' symbol flashes to indicate that the
fluid level is too low. When the fluid level drops below
the minimum level, the cleaning symbol and the 'fluid
low' symbol start to flash and the holder returns to its
starting position
English
17