Philips PT920CC User Manual page 27

Problem
The shaver is not
entirely clean after
I clean it in the
Jet Clean System
(specific types
only).
Possible cause
The temperature of the
shaver is too high. In this
case, the shaver does
not work.
The cleaning fluid in
the cleaning chamber is
soiled.
The cleaning fluid level
is too low. If the fluid
volume in the cleaning
chamber drops below
the minimum level
during the cleaning
program, the program
aborts.The cleaning
symbol and the 'fluid
low' symbol flash at
intervals and the holder
returns to its starting
position.
You have used another
cleaning fluid than the
original Philips cleaning
fluid.
English
Solution
As soon as the
temperature of the
shaver has dropped
sufficiently, you can
switch on the shaver
again.
Empty and rinse the
cleaning chamber.
Refill the cleaning
chamber with
cleaning fluid up to
the MAX level (see
chapter 'Cleaning and
maintenance').
Only use HQ200
Philips Cleaning Fluid.
27