Removing The Panel-Side - Samsung NE597N0PBSR Servise Manual

3. Disassembly and Reassembly

3-17 Removing The Panel-Side

WARNING
ELECTRICAL SHOCK HAZARD
Disconnect power before servicing the range. Replace all panels before operating range. Failure to do so
can result in death or electrical shock.
PRECAUTION
When you work on the electric range, be careful when handling the sheet metal parts. Sharp edges may
be present, and you can cut yourself if you are not careful.
Parts
Panel
Side
Panel Side
* Reassembly of All part is the reverse order of disassembly.
Explanation Photo
34
Explanation
1. Turn off the electrical supply.
2. Remove the oven door from the range
(see page 3-14 for the procedure).
3. Pull the range away from the wall so
you can access the back of the unit.
4. Remove the 8 screws from the rear of
Panel-Side and remove Cooktop.
5. Remove the (each) 3screws from the
top the Panel-Side.
6. Pull the back of the side panel out from
7. Push forward and remove Panel-Side.