Table of Contents
Advertisement
14
Battery Use
(LS 4900 Models Only)
Battery powered LS 4900 models uses NiCad rechargeable batter-
ies.
A lit yellow LED on the back of the scanner indicates low battery
power. When this occurs, change replaceable batteries or recharge
rechargeable ones. NiCad batteries may be recharged by inserting
them in battery adapters on the Universal Four Slot Charger. See
charger specifications for required charge time.
If NiCad rechargeables are used and the scanner cable is attached
to an AC power source, the batteries are trickle-charged. Note that
batteries can be constantly charged without damage. Trickle charg-
ing of batteries takes about 12 hours.
Quick Reference
Advertisement
Table of Contents
