Symbol LS 4800 Quick Reference page 10

8
Scanning with the LS 4800 / LS 4900
Depending on how it is programmed, the LS 4800 or LS 4900 may
work in one of these ways:
1. Aiming Dot Option: When you pull the trigger, the scanner
forms a bright aiming dot which can be easily seen in outdoor
or high ambient light environments. A slab raster pattern
or an open raster pattern appears next, depending on the
programmed scanning option.
2. Slab Raster Option: When you pull the trigger, the scanner
forms a slab raster pattern. If the bar code is PDF417, the
pattern opens up.
3. Always Raster Option: When you pull the trigger, the pattern
opens out to a full raster pattern.
These are the patterns:
Quick Reference
Aiming "Dot" Pattern
"Slab" Raster Pattern
Open Raster Pattern