Radio Operations - Clarion DXZ788RUSB Owner's Manual

01_DXZ788RUSB_EN.book 23 ページ ２００７年１１月２７日 火曜日 午後６時３４分

Radio Operations

Listening to the radio
1. Press the [SRC] button and select the radio
mode. The frequency or PS and PTY
appears in the display.
∗ PS: Programme service name
∗ PTY: Programme type
2. Press the [MENU] button and select the
radio band. Each time the button is pressed,
the radio reception band changes in the
following order:
FM1 FM2 FM3
FM1...
3. Push the [SEEK PANEL] leftward or
rightward to tune in the desired station.
Tuning
There are 3 types of tuning mode available,
seek tuning, manual tuning and preset tuning.
Seek tuning
There are 2 types of seek tuning: DX SEEK and
LOCAL SEEK.
DX SEEK can automatically tune in to
receivable broadcast stations; LOCAL SEEK
can tune in to only broadcast stations with a
good reception sensitivity.
1. Press the [MENU] button and select the
desired band (FM or AM (MW/LW)).
2. Tune into a station.
∗ If "MANU" is lit in the display, press and hold
the [MENU] button for 1 second or longer.
"MANU" in the display goes off and seek
tuning is now available.
∗ If "TA" is lit in the display, TP stations are
automatically sought.
DX SEEK
Push the [SEEK PANEL] leftward or rightward
to automatically seek a station.
When the [SEEK PANEL] is pushed rightward,
the station is sought in the direction of higher
frequencies; if the [SEEK PANEL] is pushed
leftward, the station is sought in the direction of
lower frequencies.
∗ When seek tuning starts, "DX SEEK" appears in
the display.
AM (MW/LW)
LOCAL SEEK
If the [SEEK PANEL] is pushed leftward or
rightward and held in position for 1 second or
longer, local seek tuning will be enabled.
Broadcast stations with good reception
sensitivity are selected.
∗ When local seeking starts, "LO SEEK" appears in
the display.
Manual tuning
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the
frequency changes one step at a time. In the
quick tuning mode, you can quickly tune the
desired frequency.
1. Press the [MENU] button and select the
desired band (FM or AM (MW/LW)).
∗ If "MANU" is not lit in the display, press and
hold the [MENU] button for 1 second or
longer. "MANU" is lit in the display and manual
tuning is now available.
2. Tune into a station.
Quick tuning
Push the [SEEK PANEL] leftward or rightward
and hold in position for 1 second or longer to
tune in a station.
Step tuning
Push the [SEEK PANEL] leftward or rightward
to manually tune in a station.
∗ If no operation is performed for more than 7
seconds, manual tuning is cancelled and the
display returns to the previous mode.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio
stations in memory. Pushing the [P.CH] button
upward or downward recalls the stored radio
frequency automatically.
1. Press the [MENU] button and select the
desired band (FM or AM (MW/LW)).
2. Push the [P.CH] button upward or downward
to recall the stored station.
23
DXZ788RUSB