Samsung RL-55 series User Manual page 15

REVERSING THE
REFRIGERATOR DOOR
(CONT'D)
6. Separate the Front leg cover after removing 2
screws.
Screw
7. Unscrew 2 bolts tightening the Bottom hinge
and also unscrew a bolt on the left side by the
front leg where removed Bottom hinge will be
attached.
10 mm 10 mm
Before removing the Bottom hinge, slightly
turn the front legs clockwise for easier
disassembling and assembling.
8. Switch the position of the Bottom hinge shaft.
Remove the screw on the Auto guide and
remove the Bottom hinge shaft with 11 mm
wrench.
Attach the Bottom hinge shaft on the left and put
the reversed Auto Guide back.
Screw Screw
9. Attach the Bottom hinge on the bottom left side
of the refrigerator where a bolt was previously
removed in step 8.
Screw remaining bolt on the bottom right side of
the refrigerator for the future usage.
DA99-02116A (EN)-12.indd 15 DA99-02116A (EN)-12.indd 15
Front leg cover Front leg cover
10 mm 10 mm
Auto guide Auto guide
Bottom hinge shaft Bottom hinge shaft
10. Switch the side of bottom hinge cap and then
attach the Front leg cover on the bottom of the
refrigerator.
Bottom hinge cap Bottom hinge cap
11. Switch the side of the Middle hinge cap, Screw
cap and a Screw from left to the right side.
Middle hinge cap Middle hinge cap
12. Remove the screw on the bottom right side of
the Freezer door.
Switch the Door stopper and the Hinge grommet
from the right to the left.
Door stopper Door stopper
Hinge grommet Hinge grommet
13. Switch the Hinge grommet and the Grommet cap on
the top of the Freezer door.
Hinge grommet Hinge grommet
Screw Screw
Screw cap Screw cap
Grommet cap Grommet cap
setting up _15
2014. 8. 14. 2014. 8. 14. 1:26 1:26