Table of Contents
Advertisement
Setting Item
Default Value
Audio TV Out (SUB)
Off
Audio Return
–
Channel
Lip Sync
On
44
Setting Details
You can enjoy audio through the speakers of
the HDMI connected TV while this unit is on.
"On": Use this function
"Off": Do not use this function
r Listening mode cannot be changed while
"Audio TV Out (SUB)" is set to "On" and
audio is being output through the speakers
of the TV.
r Depending on your TV set or input signal
of the component, audio may not output
through the speakers of the TV even if this
setting is set to "On". In such case, audio is
output from the speakers of the unit.
r If you operate the MASTER VOLUME
control of the unit when "Audio TV Out
(SUB)" is set to "On" and you are listening
to the audio through the speakers of your
TV, audio will be output from the unit. If you
do not want to output audio from the unit,
change the unit or TV settings, or reduce the
volume of the unit.
r "Audio TV Out (SUB)" is fixed to "Off" if
"Monitor Out" is set to "MAIN".
You can enjoy sound of the HDMI connected
ARC compatible TV through the speakers
connected to the unit. To use this function, set
"HDMI CEC (RIHD)" to "On" in advance.
"Auto": When enjoying the TV sound through
the speakers connected to the unit
"Off": When not using the ARC function
r Set "Control Monitor" to "MAIN" when
changing this setting.
This setting automatically corrects any
desynchronization between the video and audio
signals based on data from the HDMI LipSync
compatible TV.
"On": Automatic correction will be enabled.
"Off": Automatic correction will be disabled.
Setting Item
Default Value
InstaPrevue
Sub Window
Multi
Position
Bottom/Lower
Right
r If "Monitor Out" is set to "MAIN+SUB" and "Audio TV Out (SUB)" is set to "On"
– Set the audio output of the connected device to "2ch PCM".
– If the audio input is via other than HDMI, sound of the TV connected to the HDMI OUT SUB jack
will not be output.
Auto Standby
Setting Item
Default Value
Auto Standby
On/Off
Advanced Settings
Setting Details
Change the preview display of the video input
through HDMI, which will be displayed using
"InstaPrevue" in the Home menu.
r Depending on the video source, the preview
thumbnails configured in "InstaPrevue" may
not be displayed properly.
Set how to display preview thumbnails.
"Multi": Displays all the thumbnails of HDMI IN
1, 2, 3, 4 and Front at once.
"Single": Displays each thumbnail individually.
Set the position to display preview thumbnails.
When "Multi" is selected for "Sub Window":
Select from "Top", "Bottom", "Left" and "Right".
When "Single" is selected for "Sub Window":
Select from "Upper Left", "Upper Right", "Lower
Left" and "Lower Right".
Setting Details
This setting places the unit on standby
automatically after 20 minutes of inactivity
without any video or audio input.
"On": The unit will automatically enter standby
mode ("ASb" will stay lit).
"Off": The unit will not automatically enter
standby mode.
r "Auto Standby" is appeared on the display
and menu screen 30 seconds before the
Auto Standby comes on.
r "Auto Standby" does not work when Zone 2/
Zone 3 is active.
r Default values vary depending on the
regions.
Hide quick links:
Advertisement
Table of Contents
