MODEL 720-0230 GAS HOSE RETENTION KIT
Package should include (4 pcs):
Regulator ring clamp with wing
1 Hex Nut and washer
Hose Clamp Installation
1a. Insert "threaded end"
mounting bolt through top middle
vent
2a. Put regulator hose through
ring clamp
INSTALLATION INSTRUCTION
1b. Tighten nut with washer from
the out side of panel with the
included wrench
2b. Use wing bolt to fasten regulator
hose to ring clamp securely
14
Mounting bolt with ring slot
1 wrench