Makita PM7650H Owner's And Safety Manual page 18

2) Put the mist blower on a flat surface.
3) Before filling the solution tank, be sure to close the solution discharge button (1).
4)-1 For Brazil:
The solution tank is capable of 15 liters of solution.
When the tank is full, the total weight including solution is nearly 30 kg. Adjust
the solution pouring volume so that the mist blower with solution in tank does
not overweigh and can be within an operator's strength.
When the total product weight of 25 kg or less after filling is needed, use the
level line on the side of the solution tank at or below 10 l as a guideline.
4)-2 For countries other than Brazil:
The solution tank is capable of 15 liters of solution.
When the tank is full, the total weight including solution is nearly 30 kg.
Adjust the solution pouring volume so that the mist blower with solution in tank
is not overweighted and can be within an operator's strength.
When 10 liters of solution is poured (that is, when the poured solution level
points 10 l marking on the side of the tank), the total product weight is nearly
25 kg.
5. Solution discharge button
Note:
• When the solution discharge button (1) cannot be moved easily, apply lubricant
for rubber (eg. spraying silicon) in the area shown in the figure.
To start the solution feeding, press the solution discharge button (1), turn it while
pressing and release it in the position where the button edge is retained by the boss
(2).
To stop the solution feeding, turn the solution discharge button slightly to the original
direction for releasing the button from the retained position. Make sure that the
solution discharge button has returned to the original position.
18
(1)
(1)
(1)
(2)