SOYO 5ehm User Manual page 39

BIOS Setup
Onboard Parallel Port
Parallel Port Mode
ECP Mode Use DMA
Parallel Port EPP Type
3. After you have finished with the Integrated Peripherals, press the
<ESC> key and follow the screen instructions to save or disregard
your settings.
Choose the parallel port I/O address:
378H/IRQ7 (default), 3BCH/IRQ7,
278H/IRQ5, or Disabled to disable this
port.
Choose ECP+EPP (default), SPP, EPP,
or ECP. The mode depends on your
external device that connects to this port.
Choose DMA3 (default) or DMA1.
This setting only works when the
Onboard Printer Mode is set at the ECP
mode.
Choose EPP 1.9 (default) or EPP 1.7.
35