Table of Contents
Advertisement
BIOS Setup
Quick Power
On Self Test
Boot Sequence
Swap Floppy
Drive
Boot Up Num
Lock Status
Gate A20
Option
Memory
Parity/ECC
Check
Typematic Rate
Setting
Typematic Rate
(Chars/Sec)
Typematic
Delay (Msec)
Enabled provides a fast POST at boot-up .
Choose the boot device sequence as your need. For
example, ÒA, C, SCSIÓ means BIOS will look for an
operating system first from drive A, drive C, then
SCSI device. Options of this function are:
A, C, SCSI
C, A, SCSI
C, CDROM, A
CDROM, C, A
D, A, SCSI
E, A, SCSI
F, A, SCSI
SCSI, A, C
SCSI, C, A
C only
LS/ZIP, C.
Enabled changes the sequence of the drive A and
drive B to drive B and drive A. (The Default setting
is Disabled.)
Choose On (default) or Off. On puts numeric keypad
in Num Lock mode at boot-up. Off puts this keypad
in arrow key mode at boot-up.
Choose Fast (default) or Normal.
Choose Enabled or Disabled (default). Set this
option to Enabled when using ECC or Parity check
memory.
Enable this option to adjust the keystroke repeat rate.
Default is Disabled.
Choose the rate a character keeps repeating.
Choose how long after you press a key that a
character begins repeating.
23
Advertisement
Table of Contents
