SOYO 5ehm User Manual page 32

28
PM Control by
APM
Video Off Option
Video Off Method
Modem Use IRQ
Soft-Off by PWR-
BTTN
HDD Power Down
Doze Mode
Standby Mode
Choose Yes (default) or No. APM stands for
Advanced Power Management. To use APM,
you must run Òpower.exeÓ under DOS v6.0 or
later version.
Susp, Stby→off: Video off when the system
All Modes→off: Video off in all modes.
Always On:
Suspend→off:
Choose DPMS Support (default), Blank
screen, or V/H Sync+Blank for the selected
PM mode.
Choose Modem IRQ Setting. Default setting is
set on IRQ3.
Choose Instant-off (default) or Delay 4 Sec.
Delay 4 Sec turns off the system power 4
seconds after pushing the power button
When the set time has elapsed, the BIOS sends
a command to the HDD to power down, which
turns off the motor. Time is adjustable from 1
to 15 minutes. The default setting is Disabled.
Some older model HDDs may not support this
advanced function.
When the set time has elapsed, the BIOS sends
a command to the system to enter doze mode
(system clock drops to 33MHz). Time is
adjustable from 1 Min to 1 Hour.
The default is Disabled. Time is adjustable
from 1 Min to 1 Hour.
runs into Suspend or Standby
mode.
Video never off.
Video off when system runs
into the suspend mode.
BIOS Setup