DSC GSM 1000 Installation Manual page 18

[1] Dial Tone Selecting this option will add a 2-second dial tone search to the telephone number. The
dial tone search will be represented by a "D" in the telephone number display. A dial tone search forces
the control panel to wait for a dial tone before dialing a telephone number.
The following PC4010/PC4020/PC4020KT Menu Items are not used while programming telephone
numbers for GSM 1000 operation. Do not select these items while programming telephone numbers for
GSM 1000 operation, as adding pauses or the DTMF digits may result in improper dialing.
[2] Pause 2 Seconds [4] DTMF *
[3] Pause 4 Seconds [5] DTMF #
Links Module - The PC4010/4020/4020KT panels must be programmed to work with the GSM1000
module. This is done by enabling the LINKS module. Doing so automatically enables the PGM1 Output
for GSM1000 operation.
Periodic Test - A periodic test transmission can be sent through the GSM network. This option must be
turned on to be enabled.
Transmission Cycle Days - Enter the number of days between test code communications. Valid entries
are from 001 to 255; the default setting is 030.
Transmission Cycle Time - Enter the time of day for the test transmission. Enter the time in the 24-hour
clock format, where the first 2 digits are the hours ranging from 00 to 23, and where the last 2 digits are the
minutes ranging from 00 to 59. The default setting is 0000.
GSM 1000 Trouble Reporting - Program Zone 1 trouble reporting code, and restoral reporting code.
16