Auto Turn Signal; Cruise Control; Side Blind Zone Alert; Automatic Headlamp System - Chevrolet 2009 tahoe Getting To Know Manual

Hide thumbs Also See for 2009 tahoe:
Table of Contents

Advertisement

Getting to Know Your Tahoe/Suburban
18

Auto Turn Signal

The turn signal lever includes an auto-
matic lane change signal feature.
To signal a lane change, raise or lower
the lever until the arrow on the instru-
ment panel cluster starts to flash, and
then release the lever. The turn signal
will automatically flash three times. If
the Tow/Haul mode is selected, the turn
signal will automatically flash six times.
To signal a turn, move the lever all the
way up or down.
See Section 3 of your Owner Manual.
Cruise Control (if equipped)
The cruise control
buttons are locat-
ed on the steering
wheel.
(On/Off):
Press this button
to turn the cruise
control system on
or off.
– SET (Set):
Press this button
to set a speed, or
to decrease the speed if the system is
set. When the cruise control speed is
set, the cruise light will illuminate in the
instrument cluster.
+ RES (Resume): Press this button to
resume a set speed, or to increase the
speed if the system is set.
(Cancel): Press this button to can-
cel the cruise control but retain the set
speed in memory.
See Section 3 of your Owner Manual.

Side Blind Zone Alert

(if equipped)
When a vehicle is detected in your blind
zone on either side of the vehicle, a
warning light will be displayed in the
corresponding outside mirror. If the turn
signal is activated while a vehicle is
detected, the warning light will flash.
The system is turned on each time the
vehicle is started. It can be turned off
using the DIC.
See Sections 2 and 3 of your Owner Manual.

Automatic Headlamp System

and Interior Lamps

Your vehicle is equipped with an
Automatic Headlamp System, which
turns on the Daytime Running Lamps
(DRLs) during the day and the head-
lamps and other exterior lamps at night
or when necessary.
The system uses a light sensor, located
on top of the instrument panel, to deter-
mine light conditions. For proper system
operation, avoid placing any objects on
or near the sensor.
The exterior and interior lamp controls
are located on the instrument panel to
the left of the steering wheel.
Exterior Lamp Controls
(Off/On): When operating in the
AUTO position, turn the knob to this

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2009 suburban

Table of Contents