Folding 2Nd-Row Seats; Folding 3Rd-Row Seats - Chevrolet 2009 tahoe Getting To Know Manual

Getting to Know Your Tahoe/Suburban
20

Folding 2nd-Row Seats

The 2nd-row seats fold and tumble to
provide more cargo space and access to
the 3rd-row seats.
To fold and tumble the seat:
1. Lower the head restraint and make
sure nothing is under or in front of
the seat.
2. Fold the seatback forward by lifting
the release lever located at the
bottom rear of the seatback on the
outboard side of the seat.
3. Tumble the seat forward by lifting the
release lever again.
To unfold the seat:
1. Pull down the seat until it latches to
the floor.
2. Lift up the seatback until it locks in
place. Pull on the seatback to make
sure it is locked.
Power Release Seats (if equipped)
To fold and tumble the power release
seat:
1. Shift the vehicle into Park.
2. Lower the head restraint and make
sure nothing is under or in front of
the seat.
3. Press one of the automatic release
buttons, located on the panel behind
the rear doors. The seat will fold and
tumble forward automatically.
The seat must be
unfolded manually
to return it to the
sitting position.
See Section 1 of your
Owner Manual.

Folding 3rd-Row Seats

The split 3rd-row seats fold and tumble
to provide more cargo space. Before
moving a seat, make sure nothing is
under or in front of the seat.
A
To fold and tumble the seat:
1. Fold the seatback forward by lifting
the release lever (A) located at the
bottom rear of the seatback on the
outboard side of the seat and lower
the head restraint.
2. Tumble the seat forward by lifting the
release lever (B) located next to the
handle on the center rear of the seat.
3. Tilt the seat fully forward to lock it
in place.
To unfold the seat:
1. Lower the seat by lifting the release
lever (B) located to the left of the
handle on the center rear of the seat.
2. Pull down the seat until it latches to
the floor.
3. Lift up the seatback until it locks in
place. Pull on the seatback to make
sure it is locked.
B