Main And Secondary Control Boards - Viking RDDFF236 Service Manual

Service Diagnostics and procedures–Disassembly
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power to unit using power
switch before servicing. Wires removed during disassembly must be replaced on proper terminals to insure
correct earth ground and polarization. After servicing, reconnect power using power switch.

Main and Secondary Control Boards

To access main and secondary control boards:
1. Remove securing screws and outer control
board cover.
2. Lift off the clear control board cover.
Clear Cover
© 2012 Viking Preferred Service
WARNING
3. Disconnect wiring. Press tab to release main or
Screw
4. Repair or replace control boards.
5. Reverse procedure to reinstall.
secondary control board.
Tab
Tab
51