Freezer Drawer, Bins, Baskets, Glides And Glide Adapters - Viking RDDFF236 Service Manual

Service Diagnostics and procedures–Disassembly
To avoid risk of electrical shock, personal injury, or death, disconnect electrical power to unit using power
switch before servicing. Wires removed during disassembly must be replaced on proper terminals to insure
correct earth ground and polarization. After servicing, reconnect power using power switch.
Freezer Drawer, Bins, Baskets, glides
and glide adapters (continued)
7. Pull out ice maker tray. Press release clips
inward on left and right glides. Pull ice maker
tray forward to remove.
Clip
8. Remove screw from center upper drawer glide
bracket.
Tabs
9. Push bracket towards rear of freezer to
disengage tabs and remove center upper
bracket.
© 2012 Viking Preferred Service
WARNING
Clip
Screw
10. Extend left upper glide. Remove securing
screws to remove glide.
Screw
11. Extend right upper glide. Remove securing
screws to remove glide.
Screw
Screw
Screw
41