Electric Adjustable Pedals; Seats - Buick Rainier 2004 Getting To Know Manual

Getting to Know Your Rainier
10
3. Press the Personalization button
repeatedly until the display is blank.
4. Using your driver's door-mounted
electric controls, adjust the mirrors
downward to allow you to see curbs
when backing up while the vehicle is
in REVERSE (R) and the brake pedal
is pressed.
5. When the vehicle is shifted out of
REVERSE (R), the mirrors return to
their original positions, and the
REVERSE (R) positions are saved for
the current driver.
See Section 2 of your Owner Manual.

Electric Adjustable Pedals

Shorter drivers can
adjust the brake and
accelerator pedals to
a comfortable posi-
tion by using the tog-
gle switch located on the steering col-
umn. The vehicle must be in PARK (P)
for this feature to operate.
• Press the switch toward you to move
the pedals closer.
• Press the switch away from you to
move the pedals away from you.
This feature can be programmed to work
with your vehicle's memory feature. See
the "Memory Settings for Driver's Seat,
Mirrors, Pedals, Radio and Climate
Control" section of this booklet.
See Section 2 of your Owner Manual.

Seats

B
Heated Seats (if equipped): The but-
tons to control this feature are located
on the front door armrests. Controls can
be set to heat the seatback only or the
seatback and the seat cushion. The
three lights next to the controls indicate
LO, MED or HI setting. Push the BACK
ONLY switch ("B" above) to activate
heat for the seatback only. An indicator
light illuminates when the seatback is
being heated. Push the horizontal switch
("A" above) to heat the whole seat.
Note: The engine must be running for
the heated seat feature to operate.
See Section 1 of your Owner Manual.
Easy Exit Driver Seat
Two personalized driver exit seat posi-
tions can be set by following these
steps:
1. First, set the Easy Exit Driver Seat
feature to "ON" in your Driver
Information Center (see "Vehicle
Personalization" in the Driver
Information Center section of this
booklet.)
A