Electric Parking Brake - Buick ENVISION 2018 Getting To Know Your

LIGHTING
Exterior Lamps
Rotate the knob to activate the
exterior lamps.
Off/On
AUTO Automatic Headlamp System
Automatically activates the Daytime Running
Lamps (DRLs) or the headlamps and other
exterior lamps depending on outside light
conditions.
Parking Lamps
Headlamps
Fog Lamps
Press to turn the fog lamps on or off.
IntelliBeam System
The IntelliBeam system automatically turns the high-beam headlamps on/off based on traffic
conditions. A green
indicator displays when the high-beam headlamps are on.
blue
Turn the lamp control to the AUTO position to turn the automatic high-beam system on
or off.
Note: IntelliBeam activates the high-beam headlamps only when driving over 25 mph.
Adaptive Forward Lighting
The system pivots the headlamps left or right in the direction of travel.
Note: The system operates only when the exterior lamps control knob is in the AUTO position,
at speeds greater than 2 mph, and after driving a short distance to calibrate the system.
Instrument Panel Lighting
Rotate and hold the

ELECTRIC PARKING BRAKE

To apply the parking brake, pull the
Parking Brake switch.
To release the parking brake, turn on the
ignition, press the brake pedal, and then
press the switch.
Note: The parking brake will release automatically
if the vehicle is running, placed into gear and an
attempt is made to drive.
See Driving and Operating in your Owner's Manual.
F Optional equipment
F
indicator displays on the instrument cluster when the system is on; a
F
thumbwheel to adjust the instrument panel lighting.
See Lighting in your Owner's Manual.
15