Onstar System; Audio Systems - Buick Rainier 2004 Getting To Know Manual

2. Select memory button 1 or 2 on the
driver's door.
3. Move the driver's seat to the desired
exit position.
4. Press and hold the Exit button
located on the driver's door (shown
on previous page) for three seconds.
A double chime will sound confirming
that the position has been stored.
With the vehicle in PARK (P), the exit
seat position for that driver can be
recalled by pressing the Exit button.
If no exit position is stored, the seat
defaults to a completely rearward
position.
See Section 2 of your Owner Manual.
OnStar ® System
OnStar ® uses Global Positioning System
(GPS) satellite technology, wireless
communications and a real person at
our call center to provide safety, securi-
ty, information and convenience services
to you on the road. With the purchase of
a new OnStar ® -equipped Rainier, one
year of OnStar's Safe & Sound service
is included at no additional charge.
Upgrades and extensions are available.
Pressing the OnStar
button ( ) located on the left side
of your steering wheel allows you to
interact with the OnStar
the OnStar ® manual provided with your
vehicle for more information, or visit on
the Web at www.onstar.com.
See Section 2 of your Owner Manual.
® Voice/Recognition
®
system. See

Audio Systems

Radio with Cassette/CD and RDS
Setting the Clock: Press and hold the
H (or HR) button until the correct hour
appears. AM or PM will appear on the
radio display. Press and hold MN until
the correct minute appears.
To set the time to the time of an FM
station broadcasting RDS information,
press/hold HR and MN simultaneously
for two seconds until UPDATED (and
the clock symbol) appears on the dis-
play. If the time is not available from the
station, NO UPDAT will appear.
Setting Stations: You can set up to 30
station presets (six AM, six FM1, six
FM2; an XM1 and XM2 satellite sub-
scription is available).
• Turn the radio on.
• Press BAND to select AM, FM1, etc.
• Tune to the desired station using the
seek function or tune knob.
• Press AUTO EQ or AUTO TONE (as
applies to your radio) to select the
sound equalization best suiting the
type of station selected.
• Press/hold a numbered button until a
beep confirms storage of the station.
• Repeat the previous steps for each
pushbutton.
11