Erasing And Editing A Title; Creating And Editing A Playlist - Sony RDR-HX520 Service Manual

QQ
3 7 63 1515 0
To open up disc space
To open up disc space on a DVD+RW or
DVD-RW (Video mode), erase the title with
the largest number in the title list.
Largest title number
For the HDD and DVD-RWs (VR mode),
you can erase any title.
For DVD-Rs and DVD+Rs, the available disc
space does not increase even if you erase
titles.
See "Erasing and Editing a Title" on page 64
or "Erasing multiple titles (Erase Titles)" on
page 65.
To switch between the Playlist and Title
List
You can display the Playlist titles in the Title
List (Playlist), or the original titles in the Title
List (Original). To switch the two Title Lists,
</
, while a Title List is displayed.
press
To create and edit a Playlist, see page 67.
TE
L 13942296513
64
3
Press ENTER if point A is correct.
If point A is incorrect, select point A
using c/C, and press ENTER. The
display for setting point B appears.
4
m M
Select point B using / , and
press ENTER.
Playback pauses.
5
Press ENTER if point B is correct.
If point B is incorrect, select point B
using c/C, and press ENTER. The
display asks for confirmation.
• To reset point A, press M and
O RETURN, and go to step 2.
• To reset point B, press M and repeat
step 4.
• To preview the title without scenes to
be erased, select "Preview" (except for
DVD+RWs).
6
Select "OK," and press ENTER.
The scene is erased. The display for
setting point A appears.
• To continue, go to step 2.
• To finish, select "Quit."
z Hint
A chapter mark is inserted after the scene was
erased. The chapter mark divides the title into
separate chapters on either side of the mark.
b
Notes
• Images or sound may be momentarily interrupted
at the point where you erase a section of a title.
• Sections shorter than five seconds may not be
erased.
• For DVD+RWs, the erased section may be
slightly different from the points you selected.
www
.
66
http://www.xiaoyu163.com
Erasing and Editing a
Title
+ +
HDD RW -RW -RW R
VR
Video
-R -R
VR
Video
This section explains the basic edit functions.
Note that editing is irreversible. To edit the
HDD or DVD-RWs/DVD-Rs (VR mode)
without changing the original recordings,
create a Playlist title (page 67).
CHAPTER
MARK
CHAPTER
ERASE
MARK
TITLE LIST
</M/m/,,
ENTER
O RETURN
OPTIONS
. >
mc CM
X
1
Press TITLE LIST.
For HDD titles or DVD-RWs/DVD-Rs
</ , to switch the
in VR mode, press
Title Lists, if necessary.
2
Select a title, and press ENTER.
The sub-menu appears.
3
Select an option, and press ENTER.
You can make the following edits to the
title.
"Erase": Erases the selected title. Select
"OK" when asked for confirmation.
"Protect": Protects the title. " " appears
next to the protected title.
"Title Name": Allows you to enter or re-
enter a title name (page 34).
"A-B Erase": Erases a section of the title
(page 65).
"Divide": Divides a title into two titles
(page 66).
Dividing a title (Divide)
* *
HDD -RW -R
VR VR
If you want to dub a long title to a disc but do
not want to reduce the picture quality, divide
the title into two shorter titles. Note that
dividing a title cannot be undone.
* Only playlist titles can be divided for DVD-RWs/
DVD-Rs (VR mode).
1
Press TITLE LIST.
Press < , to switch the Title Lists, if
/
necessary.
2
Select a title, and press ENTER.
The sub-menu appears.
3
Select "Divide," and press ENTER.
The display for setting the dividing point
appears, and the title starts to play.
• To return to the beginning of the title,
press X and then press ..
4
Select the dividing point by pressing
m/M, and press ENTER.
Playback pauses.
5
Press ENTER if the dividing point is
correct.
If the dividing point is incorrect, select
the dividing point using c/C, and
press ENTER. The display asks for
confirmation.
M
• To change the dividing point, press .
6
Select "OK," and press ENTER.
The title is divided in two.
x ao u163
z Hint
y
After a title is divided, the title name prior to
division is assigned to both the first and second
parts.
i
http://www.xiaoyu163.com
2 9
8
"Set Thumbnail": Changes the title's
thumbnail picture that appears in the
Title List (page 30).
"Make a Playlist": Adds the entire title to
the Playlist title as one scene (page 69).
z Hints
• You can erase multiple titles at one time
(page 65).
• You can automatically erase titles that have
already played (page 93).
• You can label or re-label DVDs (page 35).
b
Note
DVD-RW/DVD-R (VR mode) playlist titles cannot
be protected.
Erasing multiple titles (Erase
Titles)
HDD + RW -RW -RW + R
VR
Video
-R -R
VR
Video
You can select and erase more than one title
at one time using the OPTIONS menu.
1
Press TITLE LIST.
For HDD titles or DVD-RWs/DVD-Rs
</
, to switch the
in VR mode, press
Title Lists, if necessary.
2
Press OPTIONS to select "Erase
Titles," and press ENTER.
The display for selecting titles to be
erased appears.
3
Select a title, and press ENTER.
A check mark appears in the check box
next to the selected title.
• To clear the check mark, press ENTER
again.
• To clear all of check marks, select
"Reset."
4
Repeat step 3 to select all of the titles
Q Q
you want to erase.
3 6 7 1 3
Creating chapters manually
HDD -RW -R
VR VR
You can manually insert a chapter mark at
any point you like during playback or
recording.
Press CHAPTER MARK at the point where
you want to divide the title into chapters.
Each time you press the button, "Marking ..."
appears on the screen and the scenes to the
left and right of the mark become separate
chapters.
To erase chapter marks
You can combine two chapters by erasing the
chapter mark during playback.
Press ./> to search for a chapter
number, and while displaying the chapter
containing the chapter mark you want to
erase, press CHAPTER MARK ERASE.
The current chapter combines with the
previous chapter.
b
Notes
• When dubbing, any chapter marks you enter will
be erased.
• To insert a chapter mark manually during
recording, set "Auto Chapter" to "Off" in the
"Recording" setup.
.
1-16
9 4 2 8
5
When you finish selecting titles,
select "OK," and press ENTER.
The list of the titles to be erased appears
for confirmation.
• To change the selection, select
"Change," and repeat from step 3.
6
Select "OK" and press ENTER.
The titles are erased.
To erase all titles on the disc
You can reformat the HDD, DVD+RW, or
DVD-RW to make the disc or drive blank.
To format the HDD, see "Format" on
page 96.
To format a DVD+RW or DVD-RW disc, see
"8. Reformatting a disc" on page 38.
Erasing a section of a title
(A-B Erase)
HDD + RW -RW -R
VR VR
You can select a section (scene) in a title and
erase it. Note that erasing scenes in a title
cannot be undone.
1
After step 2 of "Erasing and Editing a
Title," select "A-B Erase" and press
ENTER.
The display for setting point A appears.
The title starts to play.
• To return to the beginning of the title,
press X and then press ..
Playback point
2
m M
Select point A using / , and
press ENTER.
Playback pauses.
1 5 0 5 8 2 9 9 4
,continued
65
Creating and Editing a
Playlist
HDD -RW -R
VR VR
Playlist edit allows you to edit or re-edit
without changing the actual recordings. You
can create up to 97 Playlist titles.
Example: You have recorded the final few
matches of a football tournament on a DVD-
RW/DVD-R (VR mode). You want to create
a digest with the goal scenes and other
highlights, but you also want to keep the
original recording.
Original
Playlist
In this case, you can compile highlight scenes
as a Playlist title. You can even rearrange the
scene order within the Playlist title.
The Playlist title calls up data from the
original titles for playback. When an original
title is used for a Playlist title, the original
title cannot be edited and erased.
b
Note
Playlist titles containing titles recorded with the
"Copy-Once" copy protection signal cannot be
dubbed or moved (page 73).
m
co
,continued
67
9 9
2 8 9 9