Recording From Connected Equipment - Sony RDR-HX520 Service Manual

QQ
3 7 63 1515 0
:
Indicates the setting is being recorded to
the HDD.
:
Indicates the setting is being recorded to
a DVD.
When all of the timer settings do not fit
on the list, the scroll bar appears.
To view the hidden timer settings, press
M/m.
2
Select the timer setting you want to
check/change/cancel, and press
ENTER.
The sub-menu appears.
3
Select one of the options, and press
ENTER.
"Modify":
Changes the timer setting.
Select an item using </, and adjust
using M/m. Select "OK," and press
ENTER.
"Erase":
Erases the timer setting. Select "OK,"
and press ENTER.
TE
L 13942296513
48
3
Press INPUT SELECT repeatedly to
select "L3."
4
Select the desired audio signal when
recording a bilingual programme to
the HDD or DVD-RWs/DVD-Rs (VR
mode).
Press OPTIONS to select "Line Audio
Input," and press ENTER. Then select
"Bilingual," and press ENTER.
For details about bilingual recording, see
page 41.
5
Press REC MODE repeatedly to select
the recording mode.
For details about the recording mode, see
page 40.
6
Set the timer on the connected
equipment to the time of the
programme you want to record, and
turn it off.
7
Press c z SYNCHRO REC.
The SYNCHRO REC indicator lights up
on the front panel. The recorder is ready
to start Synchro-Recording.
The recorder automatically starts
recording when it receives an input
signal from the connected equipment.
The recorder stops recording when the
connected equipment turns off.
To stop recording
Press x REC STOP or c z SYNCHRO
REC.
To cancel Synchro Rec
Press c z SYNCHRO REC.
The SYNCHRO REC indicator on the
recorder turns off.
www
.
50
http://www.xiaoyu163.com
"Check Overlap":
Checks for overlapped settings.
The timer setting without the mark
has priority over the other settings.
Select "Close" to return to the Timer List.
To change or cancel the setting, repeat
steps 2 and 3 above.
When the timer settings overlap
The programme that starts first has priority
and the second programme starts recording
only after the first programme has finished.
will be cut off
When the recordings start at the same
time
The programme that is set last has priority. In
this example, timer setting B is set after A, so
the first part of timer setting A will not be
recorded.
When the end time of one recording and
the start time of another are the same
After finishing the previous recording, the
other recording may be delayed.
b
Notes
• The recorder starts recording only after detecting
a video signal from the connected equipment. The
beginning of the programme may not be recorded
regardless of whether or not the recorder's power
is on or off.
• During Synchro-Recording, other operations,
such as normal recording, cannot be performed.
• To use the connected equipment while the
recorder is standing by for Synchro-Recording,
cancel Synchro-Recording by pressing c z
SYNCHRO REC. Be sure to turn off the
connected equipment and press c z SYNCHRO
REC to reset Synchro-Recording before the timer
recording starts.
• The Synchro Rec function does not work when
"Line3 Input" of "Scart Setting" is set to
"Decoder" in the "Video" setup (page 89).
• The Synchro Rec function does not work with
some tuners. For details, see the tuner's operating
instructions.
• While the recorder is standing by for Synchro-
Recording, the Auto Clock Set function (page 87)
does not work.
• To use the Synchro Rec function, you must first
set the recorder's clock correctly.
If the timer settings of a Synchro-
Recording and another timer recording
overlap
Regardless of whether or not the programme
is a Synchro Rec programme, the programme
that starts first has priority and the second
programme starts recording only after the
first programme has finished.
First
programme
Second
programme
will be cut off
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
To scroll the list display by page (Page
mode)
Press / while the list display is turned
on. Each time you press , the entire
/
Timer List changes to the next/previous page
of timer settings.
To turn off the Timer List
Press TIMER LIST or O RETURN.
z Hint
While recording, you cannot modify the timer
setting for the current recording, but you can extend
the duration of the recording time (page 43).
b
Notes
• When "PDC/VPS" is set to "On" for one or more
timer recordings, the start times may change in
the event of a broadcast delay or early start.
• Even if the timer is set, timer recordings cannot be
made while recording a programme that has
priority.
• Even if the timer is set for the same daily or
weekly programme, the timer recording cannot be
made if it overlaps with a programme that has
priority. " " will appear next to the overlapped
setting in the Timer List. Check the priority order
of the settings.
Q Q
3 6 7 1 3
Recording from connected
equipment without a timer
You can record from a connected VCR or
similar device. To connect a VCR or similar
device, see "Connecting a VCR or Similar
Device" on page 21. Use the DV IN jack on
the front panel if the equipment has a DV
output jack (i.LINK jack).
1
Press HDD or DVD.
If you select DVD, insert a recordable
DVD (see "1. Inserting a Disc" on
page 27).
2
Press INPUT SELECT to select an input
source according to the connection
you made.
The front panel display changes as
follows:
programme
position
3
Select the desired audio signal when
recording a bilingual programme to
the HDD or DVD-RWs/DVD-Rs (VR
mode).
Press OPTIONS to select "Line Audio
Input," and press ENTER. Then select
"Bilingual," and press ENTER.
For details about bilingual recording, see
page 41.
4
Press REC MODE repeatedly to select
the recording mode.
For details about the recording mode, see
page 40.
5
Insert the source tape into the
connected equipment and set to
playback pause.
6
Press z REC.
This recorder starts recording.
.
1-12
9 4 2 8
Recording From
Connected Equipment
+ +
HDD RW -RW -RW R
VR
Video
-R -R
VR
Video
HDD DVD
INPUT
SELECT
</M/m/,,
ENTER
OPTIONS
z REC
REC MODE
c z
x REC
SYNCHRO
STOP
REC
Recording from connected
equipment with a timer
(Synchro Rec)
You can set the recorder to automatically
record programmes from connected
equipment that has a timer function (such as
a satellite tuner). Connect the equipment to
the LINE 3/DECODER jack of the recorder
(page 23).
When the connected equipment turns on, the
recorder starts recording a programme from
the LINE 3/DECODER jack.
1
Before recording, select HDD or DVD.
If you select DVD, insert a recordable
DVD (see "1. Inserting a Disc" on
page 27).
2
Set "Synchro Rec" to "Record to
HDD" or "Record to DVD" in the
"Recording" setup (page 93).
1 5 0 5 8 2 9 9 4
,continued
49
7
Press the pause (or play) button on the
connected equipment to cancel the
playback pause status.
The connected equipment starts playback
and the playback image is recorded by
this recorder.
To stop recording, press x REC STOP
on this recorder.
If you connect a digital video camera with
a DV IN jack
See "DV Dubbing" on page 77 for an
explanation of how to record from the DV IN
jack.
z Hint
You can adjust the settings for the recording picture
before recording. See "Adjusting the recording
picture quality and size" on page 46.
b
Notes
• When recording a video game image, the screen
may not be clear.
• Any programme that contains a Copy-Never copy
guard signal cannot be recorded. The recorder
continues to record, but a blank screen will be
recorded.
m
co
51
9 9
2 8 9 9