Advertisement
R
epair
[3] DISASSEMBLY/ASSEMBLY
[3]-1. Driver, Front cushion
DISASSEMBLING
(1) Disassemble Driver complete as illustrated in Figs. 2 and 3.
Fig. 2
1) Remove M5x35 Hex socket head bolt (2pcs.)
M5x35 Hex socket
head bolt (2pcs.)
Sleeve 8
Fig. 3
1) Remove Retaining ring (INT) R-58 from Cylinder with 1R005.
Driver complete
Retaining ring (INT) R-58 on Cylinder
3) While holding Piston ring (2pcs.)
with the slotted screwdriver to
prevent them from being caught
in the groove for Retaining ring
(INT) R-58, push Driver complete
with another slotted screwdriver
toward Top cap side.
slotted screwdriver
Housing
Handle set
Note: Sleeve 8 (2pcs.) may be
fallen from Handle set
in the disassembling step.
Therefore, pay attention
not to lose Sleeve 8.
cylinder
Piston ring (2pcs.)
on Driver complete
Inside view
2) Remove M5x25 Hex socket head bolt (4pcs.) and Top cap.
Cylinder head
Fan 60
3) Hold Housing by hand and slide it straightly
and gently in order not to hook with Fan 60,
then lift Housing obliquely as designated in
black arrow.
Note: Do not deform Fan 60.
2) Insert slotted screwdriver along with
1R005
an vertical groove of Cylinder.
Cylinder viewed from top cap side
end of Driver complete
P 3/ 16
M5x25 Hex socket
head bolt (4pcs.)
Top cap
vertical groove
of Cylinder
slotted
screwdriver
Advertisement
