Wireless Settings - D-Link DIR-516 User Manual

Section 2 - Setting Up With a Web Browser - Router Mode
This page allows you to configure the wireless LAN settings. You can also configure the wireless encryption and wireless network
parameters. Click Save.Settings.when you are done.
Enabled Access
Check the box to set the DIR-516 to Access Point Mode, and
Point Mode: uncheck the box to set the DIR-516 to Router Mode. For more
information, see "Operation Modes" on page 8.
Wireless Band:
Displays the currently selected wireless band. See page 5 for
how to change the wireless band.
Enable Wireless: Check the box to enable the wireless function. If you do
not want to use wireless, uncheck the box to disable all the
wireless functions.
Wireless Enter a wireless network name (or SSID) using up to 32
Network Name:
characters. The SSID is case-sensitive.
802.11 Mode:
Select the mix of wireless clients you are using. For instance,
if you are using 802.11n clients only, select 802.11n.only,
or if you are using 802.11ac and 802.11n clients, select.
Mixed 802.11ac. and. 802.11n. The available options are
dependent on the currently selected wireless band.
Enable Auto
Check the box to allow the DIR-516 to choose the channel
Channel with the least amount of interference.
Selection:
Wireless
Indicates the channel setting for the DIR-516. The channel
Channel: can be changed to fit the channel setting for an existing
wireless network or to customize the wireless network. If
you checked Enable.Auto.Channel.Selection, this option
will be greyed out.
D-Link DIR-516 User Manual

Wireless Settings

32