Section 2 - Setting Up With a Web Browser - Router Mode
This section will allow you to change the Internet settings of the access point. Click Save.Settings when you are done.
Internet
Select your Internet connection type from the drop-down
Connection Type:
menu. If you are not sure, check with your Internet Service
Provider (ISP).
Dynamic.IP.(DHCP)
Select Dynamic. IP. (DHCP) to obtain IP address information
automatically from your ISP. Select this option if your ISP does
not give you any IP addresses to use.
Host Name:
The host name is optional but may be required by some ISPs.
Leave blank if you are not sure.
Primary /
Enter the primary and secondary DNS addresses assigned
Secondary DNS
by your ISP.
Server:
MTU:
Enter the Maximum Transmission Unit size. The default value
is 1500.
MAC Address:
The default MAC address is set to the Internet port's physical
interface MAC address on the broadband router. It is not
recommended that you change the default MAC address
unless required by your ISP. You can use the Clone.Your.
PC's. MAC. Address button to replace the Internet port's
MAC address with the MAC address of your Ethernet card.
D-Link DIR-516 User Manual
Setup
Internet
28