Section 2 - Setting Up With a Web Browser - Access Point Mode
Select Auto to connect a device with WPS. If you select.Manual, you will
be shown the current wireless setup so that you can use the information to
connect wireless clients.
Click Next.to continue.
If you selected Auto, you will be presented with the following screen.
Choose PIN (Personal Identification Number) or PBC. (Push Button
Configuration).
If you selected PIN, enter the PIN and click Connect.
If you selected PBC, click Connect.
Press the WPS button on the wireless client within 120 seconds to connect.
If you selected Manual, you will see the following screen. Use this information
to connect a wireless client to the network.
D-Link DIR-516 User Manual
19