Netopia 4541/4542 Adsl Router Status Lights - Netopia 4541 User Reference Manual

3. Connect the Ethernet cable to the Ethernet port on the router and the other end to your computer.
You should now have: the power adapter plugged in; the Ethernet cable connected between the router and
your computer; and the DSL cable connected between the router and the DSL wall outlet.

Netopia 4541/4542 ADSL Router status lights

The figure below represents the Netopia 4541/4542 status light (LED) panel.
Netopia 4541/4542 LED front panel
The following table summarizes the meaning of the various LED states and colors:
When this happens...
The power is on
The Router detects an error
The Ethernet link is established
The WAN has trained
The WAN is training
Note: The remaining LEDs are not used.
Making the Physical Connections 2-3
the LEDs...
Power is green.
Error is red.
Ethernet is green.
DSL is green.
DSL flashes green.