Table of Contents
Advertisement
3.
Select the Router's time zone from the Time Zone pop-up menu and press Return.
4.
In the NTP Update Interval field, enter how often to synchronize with the time server, using the format
HHHH:MM where H is hours and M is minutes.
5.
Select a System Date Format; the options are MM/DD/YY, DD/MM/YY, and YY/MM/DD, where M is
month, D is day, and Y is year.
6.
Select a System Time Format, either AM/PM or 24hrs.
7.
Press Escape to return to the System Configuration menu.
Console configuration
You can change the default terminal communications parameters to suit your requirements.
To go to the Console Configuration screen, select Console Configuration in the System Configuration screen.
Baud Rate...
SET CONFIG NOW
Follow these steps to change a parameter's value:
1.
Select 57600, 38400, 19200, or 9600.
2.
Select SET CONFIG NOW to save the new parameter settings. Select CANCEL to leave the parameter
unchanged and exit the Console Configuration screen.
SNMP (Simple Network Management Protocol)
These screens allow you to monitor and configure your network by means of a standard Simple Network
Management Protocol (SNMP) agent.
Details are given in
Console Configuration
"SNMP" on page
12-9.
WAN and System Configuration 7-17
57600
CANCEL
Advertisement
Table of Contents
