Table of Contents
Advertisement
A-2 User's Reference Guide
Console connection problems
Can't see the configuration screens (nothing appears)
Make sure the cable connection from the Netopia 4541/4542's console port to the computer being used
as a console is securely connected.
Make sure the terminal emulation software is accessing the correct port on the computer that's being
used as a console.
Try pressing Ctrl-L or Return or the up or down arrow key several times to refresh the terminal screen.
Make sure that flow control on serial connections is turned off.
Junk characters appear on the screen
Check that the terminal emulation software is configured correctly.
Check the baud rate. The default values are 9600, N, 8, and 1.
Characters are missing from some of the configuration screens
Try changing the Netopia 4541/4542's default speed of 9600 bps and setting your terminal emulation
software to match the new speed.
Network problems
Problems communicating with remote IP hosts
Verify the accuracy of the default gateway's IP address (entered in the IP Setup or Easy Setup screen).
Use the Netopia 4541/4542's Ping utility, in the Utilities & Diagnostics screen, and try to Ping local and
remote hosts. See
successfully Ping hosts using their IP addresses but not their domain names (198.34.7.1 but not
garcia.netopia.com, for example), verify that the DNS server's IP address is correct and that it is reachable
from the Netopia 4541/4542 (use Ping).
If you are using filters, check that your filter sets are not blocking the type of connections you are trying to
make.
Local routing problems
Observe the Ethernet LEDs to see if data traffic flow appears to be normal.
Check the WAN statistics and LAN statistics screens to see more specific information on data traffic flow
and address serving. See
"Ping" on page 13-2
for instructions on how to use the Ping utility. If you can
"Statistics & Logs" on page 12-4
for more information.
Advertisement
Table of Contents
