Modifying A Scheduled Connection; Deleting A Scheduled Connection; System Configuration Screens - Netopia 4541 User Reference Manual

Modifying a scheduled connection

To modify a scheduled connection, select Display/Change Scheduled Connection in the Scheduled
Connections screen to display a table of scheduled connections.
Select a scheduled connection from the table and press Return. The Change Scheduled Connection screen
appears. The parameters in this screen are the same as the ones in the Add Scheduled Connection screen
(except that ADD SCHEDULED CONNECTION and CANCEL do not appear). To find out how to set them, see
"Adding a scheduled connection" on page

Deleting a scheduled connection

To delete a scheduled connection, select Delete Scheduled Connection in the Scheduled Connections screen
to display a table of scheduled connections.
Select a scheduled connection from the table and press the Return key to delete it. To exit the table without
deleting the selected scheduled connection, press the Escape key.
System configuration screens
You can connect to the Netopia 4541/4542's system configuration screens in either of two ways:
By using Telnet with the Router's Ethernet port IP address
Through the console port, using a local terminal (see
page 5-3)
You can also retrieve the Netopia 4541/4542's configuration information and remotely set its parameters
using the Simple Network Management Protocol (see
Open a Telnet connection to the router's IP address; for example, "192.168.1.1."
7-10.
"Connecting a console cable to your router" on
"SNMP" on page
WAN and System Configuration 7-13
12-9).