Troubleshooting And Technical Specification - Grundig GDR740DABER Instruction Manual

Grundig Replay
Troubleshooting
If a fault occurs, first check the points listed below before taking the radio for repair. If you are unable to solve a
problem by following the below hints we suggest you consult you retailer or service professional.
WARNING: Under no circumstances should you try to repair the unit yourself, as this would invalidate the warranty.
PROBLEM
No Sound
The Buttons on the Unit are not
Responding
Radio Poor Reception
Technical Specifications
Specifications ........................................................
Speaker power.......................................................
Frequency Range..................................................
LCD Display..........................................................
Power Supply........................................................
Dimension............................................................
POSSIBLE CAUSE
Your Headphones may be
connected.
The Volume may have been set to
low.
The Power Cord may not be
connected correctly/firmly.
Electrostatic discharge or
interference from other electrical
equipment.
There is weak aerial signal or there
may be interference from other
electrical equipment.
DAB+ and FM Digital Radio
7W
FM: 87.5-108MHz
DAB+: 174 – 240MHz
High Resolution Display
AC Power Input: 100-240Vac, 50-60Hz
(please use our provided adapter)
243mm x 140mm x 127mm
26
SOLUTION
Disconnect your Headphones from the
unit.
Adjust the Volume level of the radio.
Reconnect the Power Cord firmly.
Turn the unit off and disconnect the
Power Cord. Wait for 5 – 10 seconds,
then reconnect and turn the unit back
on
Reposition the aerial and the unit for
best reception possible reception.
Ensure the aerial is connected.
Keep the unit away from other
electrical equipment, where possible.