Table of Contents
Advertisement
Grundig Replay
DAB+ Radio
Turning on your DAB+ Radio
1.
Connect the Power Adaptor to the DC Socket on the back of the unit. Then insert the Power Adaptor into the
desired wall outlet.
2.
Press the
Button to turn on the unit or press again when you wish to turn off the radio. Then carefully extend
antenna for the best possible reception.
3.
When you turn on your DAB+ Radio for the first time it will conduct a full station scan and store all the available
Radio Stations in the stations list. This may take a few minutes.
Note: a. The DAB+ stations will be displayed in alphanumeric order. The first station in the list will be played after the scan
has been completed.
b. If no DAB+ signal is found in your area, it may be necessary for you to relocate your radio.
Changing Stations
To change scroll through the station list and change the DAB+ Station playing, press the Tune Button on the unit or
the Select Button on the remote control to activate the station list then use the Select Knob or Navigation Buttons to
scroll through the Station List. When you have found a station you would like to play press the Select Knob or Select
Button to confirm and the station will begin to play.
9
Hide quick links:
Advertisement
Table of Contents
