Port Leds; System Leds - NETGEAR GS700TS 724TS Hardware Installation Manual

GS700TS Hardware Installation Guide

Port LEDs

The following table describes the port LED designations.
Table 3-1. Port LEDs
Port
24/48-10/100/1000 Ports
- One LED/Port
4-SFP Ports - One LED/
Port

System LEDs

The following table describes the system LED designations.
Table 3-2. System LEDs
LED
Stack ID LED - One Seven
segment LED Display
Stack Master LED
Stack Up LED
3-22
LED
Link/ACT LED
SFP Link/ACT LED
Designation
• Green - Displays Stack ID (1-6).
• Off - Switch acts as a slave member in a stack of switches.
• Solid Green - Switch acts as a master unit in a stack of switches.
The Stack Master LED is lit if there is an active stack link, and the
unit is in stack mode.
Indicates the Up stacking port LED designations
• Off - Indicates the Up stacking port link is down.
• Solid Green - Indicates the Up stacking port link is up.
• Flashing Green - Packet transmission or reception is occurring on
the Up stacking port.
v1.0, November 2007
Designation
• Off - No 10/100Mbps link is established on the port.
• Solid Green - A valid 100Mbps link is established
on the port.
• Flashing Green - Packet transmission or reception
is occurring on the port at 100Mbps.
• Solid Yellow - A valid 10Mbps link is established on
the port.
• Flashing Yellow - Packet transmission or reception
is occurring on the port at 10Mbps.
• Off - No link is established on the port.
• Solid Green - A valid link is established on the port.
• Flashing Green - Packet transmission or reception
is occurring on the port.
Physical Description