This chapter describes the NETGEAR Smart Switch hardware features. The topics include:
•
GS724TS Front and Back Panels
•
GS748TS Front and Back Panels
•
LED Designations
•
Device Hardware Interfaces
Front and Back Panel Configuration
GS724TS Front and Back Panels
The NETGEAR GS724TS Smart Switch is a 24-Port 10/100/1000 + 4-Port SFP Combo port
switch, with each RJ45 ports capable of sensing the line speed and negotiating the operation
duplex mode with the link partner automatically.
Smart Switch front panel:
Figure 3-1
The front panel contains the following:
•
24 RJ-45 connectors for 10Base-T, 100Base-T and 1000Base-T.
•
Four SFP slots for SFP modules supporting 1000(1000Base-SX/LX)/100M SFP.
•
Reset button to restart the device.
•
Recessed default Reset button to restore the device back to the factory defaults.
•
Port LEDs.
•
System LEDs.
Physical Description
Figure 3-1
v1.0, November 2007
Chapter 3
illustrates the NETGEAR GS724TS
3-19