Lock/Unlock,Aging,Factory Mode - Philips 26MF605W/17 Service Manual

Top Control
- +
Volume
Left
Right
<B> <C>
Front Control
Power SW LED
RC sensor
<A>
AGING MODE
No signal input ,power off -> on ,then Into the factory mode, , a full
white pattern will be display on the screen as Fig.1&Fig.2 in stead of
power saving mode. In other words, the power saving function will be
disable in the factory mode.Supply one signal for leaving aging mode.
Fig.1
Fig.2
Access Factory Mode
1). Turn off monitor.
2). Press power "Power " button.Then quickly push " Volume -"
and " Volume ",and hold this two buttons , then the screen
comes out "Waiting For Automatic Adjustment ",then the screen
will be black for one second untill comes out "Windows screen"]
=> then release this two buttons, then press "Menu" button, wait
until the OSD menu with Characters "F1/FL1 NAFTA V0.91.1
041124ADJUST" (below OSD menu) come on the Screen of the
monitor (see Fig. 3).
Aging and Factory Mode
- +
Menu Channel
Down Up
<D> <E> <F>
Fig.3
Scalar Gain R G B Scalar Gain for Normal/Warm/Cool in PC
mode.
Auto-Color Adjust color from received signal (either
in PC or HDTV mode).
ADC Offset R G B Adjust AD 9883 for PC ADC offset.
ADC Gain R G B Adjust AD 9883 for PC ADC gain.
PC Offset R G B PC analog scalar offset.
711X SDTV Brightness Adjust SA 7119 SDTV brightness.
711X SDTV SAT. Adjust SA 7119 SDTV saturation.
711X SDTV Contrast Adjust SA 7119 SDTV contrast.
711X SDTV TINT Adjust SA 7119 SDTV tint (hue).
TV Shift H V Adjust TV screen position
horizontally/vertically.
HD Shift H V Adjust HDTV screen position
horizontally/vertically.
Show Lock Message Show OSD lock message.
HDTV ADC Offset R G B Adjust AD 9883 for HDTV ADC offset.
HDTV ADC Gain R G B Adjust AD 9883 for HDTV ADC gain.
Video Scalar Gain R G B Adjust scalar gain for Video mode.
Scalar Hue Adjust scalar hue.
Fig.4
26MF605W/17 9
Go to cover page