Philips 26MF605W/17 Service Manual page 89

GENERAL PRODUCT SPECIFICATION(Continued)
3.3.3 Electric characteristics of I/O
3.3.3.1 PC Signal type
Analog Video
Separate Sync. : TTL level, separate, positive or negative polarity
Audio signal : Mini-jack audio input,
Signal source
Reference generator: CHROMA 2200 or 2250
TV Signal type
3.3.3.2
RF signal : Aerial input / 10mV(80dBuV)
Video signal : Video( RCA CVBS input) / 1Vpp (300mV-sync, 700mV-video.)
S video input / 1VppY-signal, 300mVpp C-signal
COMP Video(YPbPr input)/ 1Vpp Y signal, 350mVpp Pb,Pr signal
DVI : Digital interface with 4 channels TMDS signal
Audio signal : Audio (1) R/L for AV IN1 (Video1 and S-video1).
Audio (2) R/L for AV IN2 (Video2 and S-video2).
Audio (3) R/L for AV IN3 (Video3 and Comp video).
Audio (4) R/L for DVI IN.
PVR output (CVBS output)
3.3.3.3
Video: CVBS output 1Vpp / Impedance : 75
Audio: R/L output (from CVBS)
Level: Nominal
Maximum : 1.5 V rms.
Impedance < 1 k
3.3.3.4 Headphone output
Audio: R/L output -10mW at 32.
3.5mm stereo jack with switch
Impedance is between 8 and 600.
Power input connection
3.4
Power cord length
Power cord type
26" Wide LCD Monitor / TV
TYPE
BRAND : Magnavox
2004-12-20
Peter Hsieh
: 0.7 Vp-p linear, positive polarity
Level: Nominal : 0.5 V rms.
Maximum : 1.5 V rms.
Impedance > 10 k .
: pattern generator format as attachment. (table 1 to 6 )
Level: Nominal
: 0.5 V rms.
Maximum : 1.5 V rms.
Impedance > 10 k
.
Level: Nominal
: 0.5 V rms.
Maximum : 1.5 V rms.
Impedance > 10 k .
Level: Nominal : 0.5 V rms.
Maximum : 1.5 V rms.
Impedance > 10 k .
Level: Nominal
: 0.5 V rms.
Maximum : 1.5 V rms.
Impedance > 10 k
.
.
: 0.5 V rms.
.
: 1.8 M
: 3 leads power cord with protective earth plug.
:26MF605W/17
2004-12-20
8639 000 16053
18 590
10
26MF605W/17 89
Go to cover page