Web Interface Procedure - NETGEAR 7000 Series Administration Manual
Netgear managed switch administration guide
Hide thumbs
Also See for 7000 Series:
- Administration manual (344 pages) ,
- Installation manual (2 pages) ,
- Administration manual (148 pages)
Table of Contents
Advertisement
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
Web Interface Procedure
To use the Web interface to create a DHCP server with a dynamic pool, proceed as follows:
1. From the main menu, select System > Services > DHCP Server > DHCP Server
Configuration. A screen similar to the following displays.
Figure 24-1
2. Next to Admin Mode, select the Enable radio button.
3. Click Apply to enable the DHCP service.
24-2
v1.0, May 2008
DHCP Server
Advertisement
Table of Contents
