NETGEAR 7000 Series Administration Manual page 87
Netgear managed switch administration guide
Hide thumbs
Also See for 7000 Series:
- Administration manual (344 pages) ,
- Installation manual (2 pages) ,
- Administration manual (118 pages)
Table of Contents
Advertisement
4. Enable IP Routing:
a. From the main menu, select Routing > IP > Basic > IP Configuration. A screen similar to
the following displays.
Figure 9-6
b. Under IP Configuration, make the following selections:
•
Next to Routing Mode, select the Enable radio button.
•
Next to IP Forwarding Mode, select the Enable radio button.
c. Click Apply to enable IP Routing.
5. Add a static route with IP address 192.268.40.0/24:
a. From the main menu, select Routing > Routing Table > Basic > Route Configuration. A
screen similar to the following displays.
Figure 9-7
Access Control Lists (ACLs)
NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
v1.0, May 2008
9-11
Advertisement
Table of Contents
