NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
2. Add ports 24 and 48 to VLAN 200.
a. From the main menu, select Switching > VLAN > Advanced > VLAN Membership. A
screen similar to the following displays.
Figure 27-3
b. Under VLAN Membership, select 200 from the VLAN ID pulldown menu.
c. Click Unit 1. The ports display:
•
Click the gray box under port 24 twice until U displays. The U specifies that the egress
packet is untagged for the port.
•
Click the gray box under port 48 once until T displays. The T specifies that the egress
packet is tagged for the port.
d. Click Apply to save the settings.
27-4
v1.0, May 2008
Double VLANs