NETGEAR 7000 Series Administration Manual page 208

Netgear managed switch administration guide
Hide thumbs Also See for 7000 Series:
Table of Contents

Advertisement

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
5. Enable port authentication:
a. From the main menu, select Security > Port Authentication > Basic > 802.1x
Configuration. A screen similar to the following displays.
Figure 26-5
b. Under Mode, next to Administrative Mode, select the Enable radio button.
c. Under 802.1X Configuration, select the following:
Select adam from the Users pulldown menu.
Select dot1xList from the Login pulldown menu.
d. Click Apply to save the changes.
6. Configure the MAC-based port method:
a. From the main menu, select Security > Port Authentication > Advanced > Port
Authentication. A screen similar to the following displays.
Figure 26-6
26-6
v1.0, May 2008
802.1x Port Security

Advertisement

Table of Contents
loading

Table of Contents