NETGEAR 7000 Series Administration Manual page 32

NETGEAR 7000 Series Managed Switch Administration Guide Version 7.2
Table 2-1. Quick Start Commands
Command
copy <tftp://
<ipaddress>/
<filepath>/<file-
name>> sys-
tem:image
clear config
copy system:run-
ning-config
nvram:startup-
config
(or cold boot
reload
the networking device)
2-14
Mode
Privileged Sets the destination (download) datatype to be an image.
EXEC
The URL must be specified as:
tftp://<ipaddress>/<filepath>/<filename>
The system:image option downloads the code file.
Privileged Enter yes when the prompt asks if you want to clear all the con-
EXEC figurations made to the networking device.
Privileged Enter yes when the prompt asks if you want to save the configu-
EXEC rations made to the networking device.
Privileged Enter yes when the prompt asks if you want to reset the system.
EXEC
You can reset the networking device or cold boot the network-
ing device. Both work effectively.
v1.0, May 2008
Description
Getting Started