Using Wi-Fi Direct - Zte v9800 User Manual

Add a Wi-Fi Network
You can add a Wi-Fi network if the network does not broadcast its name (SSID),
or to add a Wi-Fi network when you are out of range.
To connect to a secured network, you first need to get the security details
from the network's administrator.
>
1. Touch
2. Slide the Wi-Fi switch to the ON position.
3. Touch ADD NETWORK.
4. Enter the network SSID (name). If necessary, enter security or other net-
work configuration details.
5. Touch Save.
Forget a Wi-Fi Network
You can make your phone forget about the details of a Wi-Fi network that you
added - for example, if you don't want the phone to connect to it automatically
or if it is a network that you no longer use.
1. Touch >
2. Slide the Wi-Fi switch to the ON position.
3. Touch the Wi-Fi network name and then touch Forget.

Using Wi-Fi Direct

Wi-Fi Direct allows Wi-Fi devices to connect to each other without the need
for wireless access points (hotspots).
NOTE: Activating this feature will disconnect your current Wi-Fi network con-
nection.
>
1. Touch
2. Tick the Wi-Fi direct check box to turn on Wi-Fi direct.
3. Your phone will search for other devices enabled with Wi-Fi direct connec-
tions. Touch Wi-Fi direct settings to see all available devices.
4. Touch a device name to begin the connection process.
NOTE: The target device must also have Wi-Fi Direct service activated
and running before it can be detected by your phone.
> Settings > Wi-Fi.
> Settings > Wi-Fi.
> Settings > More.
30